Planet VIP-156 User Manual page 14

Network settings via Keypad commands
The ATA series phone adapters support telephone keypad configurations, please connect analog
telephone set and refer to the following table for machine network configurations.
IVR Menu Choice
#111#
#112xxx*xxx*xxx*
xxx#
#113xxx*xxx*xxx*
xxx#
#114xxx*xxx*xxx*
xxx#
#115xxx*xxx*xxx*
xxx#
#136#
#137#
#190#
#191#
#195#
#198#
0＊
Machine operation
Set DHCP client
Setup Static IP Address
Set Network Mask
Set Gateway IP Address
Set Primary DNS Server
Enable auto-config mode
Disable auto-config mode
Unlock
Lock
Reboot
Factory Reset
To switch PSTN mode
Parameter(s)
None
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
None
None
None
None
None
None
None
Notes:
ATA will change to DHCP
Client
DHCP will be disabled and
system will change to the
Static IP type.
Must set Static IP first.
Must set Static IP first.
Must set Static IP first.
For PLANET IPX -2000 IP
PBX System
For PLANET IPX -2000 IP
PBX System
Must unlock the protect
function before set up
network settings via
keypad.
The system will be lock
and can't set up network
settings via keypad.
The system will reboot
automatically.
The system will be reset to
factory default value and
reboot automatically.
VIP-157 only
14