Before Locating The Fixing Brackets; Adjusting The Bracket Position - Hoover HIES854MB1TT Instruction Manual

Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.

Adjusting the bracket position

Fix the hob on the work surface by screw 4 brackets on the bottom case of hob (see
picture) after installation.
A B
Screw Bracket
glass
retaining bracket
screw
ST3.5*8
Bottom case
Cautions
1. The induction hotplate must be installed by qualified personnel or technicians. We
have professionals at your service. Please never conduct the operation by
yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer, as the humidity may damage the hob electronics
3. The induction hotplate shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
C D
Screw hole Bottom case
worktop/kitchen cabinet
EN-27