Supermicro SuperServer SYS-621H-TN12R User Manual page 40

4. Align "a" on the processor carrier assembly with the triangular cutout "A" on the heatsink
along with "b", "c", "d" on the processor assembly with "B", "C", "D" on the heatsink.
5. Once properly aligned, place the heatsink on the processor carrier assembly with all
corners matched up, making sure that the four clips are properly securing the heatsink.
Note: The figure is for illustrative purposes. Your components may differ slightly from the
components shown.
Chapter 3: Maintenance and Component Installation
Assembled PHM
40