Mounting The Drive - Raymarine Universal IO Drive Install Manual

Universal I/O Drive - Installation Guide

2. Mounting the drive

Figure 3: Typical Suppression Ferrites
CAUTION:
I/O drives are affected by substantial vibration during use. When
installing this I/O drive, make sure that you fully tighten all bolts
and use lock washers. Using a suitable thread-locking compound
on the threads will help keep the bolts securely tightened.
1. Select the correct adaptor pin for your engine type.
Volvo
2. Remove the locating pin that attaches the steering cable rod to the
tiller block.
3. Replace it with the adaptor pin supplied, using the split pin to hold
it in place (see following figures).
Mercruiser
7
D3548-2
D4599-2