Installation Instructions; Parts Required; Installation Steps - Raymarine Universal IO Drive Install Manual

Universal I/O Drive - Installation Guide

Installation instructions

Parts required

Installation steps

1. EMC installation guidelines
To install the I/O drive the following parts are supplied:
• universal I/O drive unit
• power cable
• adaptor pins for Mercruiser and Volvo engines
• hexagonal bracket, securing bolts (x2), lock washers (x2)
• fixing clamps (x2), self-tapping screws (x2) and tie-wraps (x2)
WARNING: Electrical safety
Make sure you have switched off the power supply before you
start installing this product.
Follow these steps to install your I/O drive unit:
1
Consult the EMC installation guidelines.
2
Mount the drive.
3
Connect the power cable.
4
Complete the post-installation checks.
All Raymarine equipment and accessories are designed to the best
industry standards for use in the recreational marine environment.
Their design and manufacture conforms to the appropriate
Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not
compromised. Although every effort has been taken to ensure that
Ï
Ï
Ï
page 5
page 7
page 12
page 13
5