Mounting The Drive - Raymarine E12026 Installation Manual

All manuals and user guides at all-guides.com
Universal I/O Drive - Installation Guide
Figure 3: Typical Suppression Ferrites

2. Mounting the drive

CAUTION:
I/O drives are affected by substantial vibration during use. When
installing this I/O drive, make sure that you fully tighten all bolts
and use lock washers. Using a suitable thread-locking compound
on the threads will help keep the bolts securely tightened.
1. Select the correct adaptor pin for your engine type.
2. Remove the locating pin that attaches the steering cable rod to the
3. Replace it with the adaptor pin supplied, using the split pin to hold
Volvo
tiller block.
it in place (see following figures).
Mercruiser
7
D3548-2
D4599-2