Mounting The Drive - Raymarine M81138 Installation Manual

All manuals and user guides at all-guides.com
I/O Drive - Installation Guide
Figure 3: Typical Suppression Ferrites

2. Mounting the drive

CAUTION:
I/O drives are affected by substantial vibration during use. When
installing this I/O drive, make sure that you fully tighten all bolts
and use lock washers. Using a suitable thread-locking compound
on the threads will help keep the bolts securely tightened.
Raymarine provide installation kits (see Figure 4) so you can fit the
drive unit to stern drive systems made by:
• Volvo: see page 8 for installation instructions
• Mercruiser 93, OMC and Yamaha: see page 10 for installation
• Mercruiser 95: see page 12 for installation instructions
• Volvo KAD 32: requires the KAD 32 I/O drive (part number:
Figure 4: Installation kit parts (Volvo, Mercruiser 93, OMC and Yamaha)
instructions
E12019) see page 15 for installation instructions
R-clip
Adaptor pin
bracket
Securing bolt
Shakeproof
washer
Split pin
Spring-loaded
Girdle support
location pin
bracket
7
D3548-2
D3365-2