Table of Contents
Advertisement
Chapter 9: Using RNS advanced features
For full definitions of the terms used in the above table refer to Appendix L - Glossary of
Note:
terms.
3. Type your data into the appropriate fields, Click
You can further refine your analysis by using filters to narrow the number of data
test rows displayed in the Data Tests screen.
4. Click
The filter test screen enables you to display only those tests that fall within the
specific criteria you select.
The filters screen selections sort the data test rows as follows:
> = TWS
< = TWS
> = TWA
< = TWA
> = BSP
< = BSP
< = Quality Factor Displays only those tests having a quality factor less than or equal to the value
From/To
5. After completing data entries, Click OK. Returns to the data test screen.
Filters
. The filter test screen is displayed.
Displays only those tests having True Wind Speed greater than or equal to the
value entered.
Displays only those tests having True Wind Speed less than or equal to the value
entered.
Displays only those tests having True Wind Angle greater than or equal to the
value entered.
Displays only those tests having True Wind Angle less than or equal to the value
entered.
Displays only those tests having Boat Speed greater than or equal to the value
entered.
Displays only those tests having Boat Speed less than or equal to the value
entered.
entered.
Displays only those tests corresponding to dates entered.
OK
.
87
Advertisement
Table of Contents
