Table of Contents
Advertisement
96
SeaTemp
Target compare
Target create
Targetsp
Targetan
Tempdepth
Tide
True wind
DataTrak also contains a graph named - Standard - this is the standard template used by
Note:
the system whenever it creates a new DataTrak window and you should not open or use this
template.
When you open a DataTrak page or pane, data for the selected displays are
automatically shown and the graph will scroll from right to left. The most recent data is
displayed at the right hand side of the screen.
To use DataTrak:
1. Select File/Open New Page. The open page selection dialog box is displayed.
2. Highlight the
3. Click
4. Highlight the graph you want to display.
5. Click
right of the screen.
To open a custom DataTrak page:
1. Select File/Open New Page. The open page selection dialog box is displayed.
2. Highlight Custom.
Displays sea temperature and boat speed.
Compares your performance with your current targets.
Used to identify good target points when sailing upwind or downwind.
Displays Corrected True Wind Speed, Target boat speed and boat speed.
Displays Apparent wind angle, Target true wind angle and Corrected true
wind angle. and is used to observe trends in wind direction and speed.
Displays Depth below transducer and Sea temperature.
Used to establish tide set and drift.
Displays True wind direction and True wind speed. Used to observe trends in
wind direction and speed.
DataTrak
icon.
OK
. A new page will open and the DataTrak dialog box is displayed.
OK
. The selected graph is displayed. Data will automatically appear from the
RayTech RNS V5.0 - User's Manual
Advertisement
Table of Contents
