Raymarine RayTech RNS 5.0 User Manual page 62

54
To use a VRM/EBL to tell you how far away a target is and in what
direction it is traveling:
1. Click the
2. Click the
picture with your boat at its center.
3. Click the
solid line.
4. Use the cursor to adjust the VRM to its required size.
5. Click to return the VRM to a dotted line and retain the adjustment.
6. Click the
solid line.
7. Use the cursor to place the EBL over the required target.
8. Click to return the EBL to a dotted line and retain the adjustment.
When using a VRM/EBL, you may want to turn off the range rings to make the VRM/EBL
Note:
easier to see.
The distance and bearing of the target is now shown in the VRM/EBL databox. You will
be able to tell in which direction the target is traveling by watching how it moves in
relation to the EBL. If it continues to travel directly along the EBL, it indicates that it is
on a possible collision course with your boat - take the appropriate action.
VRM/EBL
softkey. The softkey options for VRM/EBL 1 will be displayed.
VRM/EBL 1
softkey to ON. The VRM/EBL will be shown on the radar
Adjust VRM 1
softkey. The on-screen VRM will change from a dotted to a
Adjust EBL 1
softkey. The on-screen EBL will change from a dotted to a
RayTech RNS V5.0 - User's Manual
D6991_1