Table of Contents
Advertisement
Chapter 9: Using RNS advanced features
Sending data
The initial procedure for sending data is the same for all of the options, but varies as
shown for the final steps.
To send data, select Waypoints/Route and Waypoint Transfer. The route and
waypoint transfer dialog box is displayed. You the have the options:
Select Route or Waypoint-
•
waypoints.
Select All
•
To send data using Select Route or Waypoint:
Note:
This example shows how to transfer waypoints. The procedure is the same for folders or
routes.
1. Highlight
2. Double-click
3. Right click the first waypoint you want to transfer. A drop-down menu is displayed.
4. Highlight
5. Click
6. Repeat Steps 3 through 5 until all the waypoints you want to transfer have been
selected.
7. Click
displayed.
8. Highlight the icon for the method of transfer you want to use.
9. Click
10. Click
- this enables you to transfer all saved route and waypoint data.
Select Route or Waypoint.
Waypoints.
The waypoint list is displayed.
Add to Transfer
.
OK
. The waypoint symbol changes to show it has been selected.
OK
. The waypoint list closes and the route and waypoint dialog box is
OK.
A dialog box showing all waypoints selected for transfer is displayed
OK
.
this enables you to transfer individual routes and
OK
Click
. The Browse dialog box is displayed.
103
.
Advertisement
Table of Contents
