Raymarine RayTech RNS 5.0 User Manual page 94

86
1. Click
The Data test screen will be displayed. This screen will initially contain a single row
of test data; however, you can store and edit as many different test data rows as
you need, each row represents a unique run and its associated performance
statistics.
2. Double-click the test data row you want to edit. The Test parameters screen will
appear.
The definitions for the cells in the table are:
Test
Date
Quality
Notes
Mainsail
Headsail
Awa
Aws
Twa
Twd
CorTwa
CorTws
CorTwd
Bsp
Vmg
Heading
Heel
Pitch
Rudder
Tab
Butt
Forestay length
Forestay strain
Set
Drift
Data
tab in the Polar Plot dialog box.
Name you have chosen for this set of test data.
Date of the test run
Number assigned by you to represent the quality of the data collected (this
can be between 1 and 100)
Your comments about the test data
Name or code for the type of mainsail used
Name or code for the type of headsail used
Apparent wind angle - in degrees.
Apparent wind speed - in knots
True wind angle - in degrees
True wind direction - in degrees
Corrected True wind angle - in degrees
Corrected True wind speed - in degrees
Corrected True wind direction - in degrees
Boat speed - in knots
Velocity made good - in knots
Heading of boat - in degrees
Amount of heel - in degrees
Amount of pitch - in degrees
Amount of rudder deflection in degrees
Amount of rudder trim tab deflection - in degrees
Setting of the mast base adjustment.
Length of the forestay - in meters or feet, specified by you.
Amount of load on the forestay
The direction of the current - in degrees
Velocity of the current - in knots
RayTech RNS V5.0 - User's Manual