Ricoh PT3 Field Service Manual page 169

Number of sheets
Speed (cpm)
Proof print mode enabled (SP2-34: ON) and skip feed mode enabled (2 sheets)
Number of sheets
Speed (cpm)
SP2-35: Number of Proof Prints
This can set the number of sheets for the print proof adjustment mode.
• Default: 1
• Adjustable range: 1 to 5 (sheets)
For details about how to use this, see the description above (SP2-34).
SP2-40, 2-55: Thermal Head Energy Control
2-40 to -45:
2-50 to 55:
SP2-60: Bold Mode: Letter Mode Only
Makes a bold outline of a letter-mode image.
SP2-61: T/H Swing Mode
If this is set to "ON", the thermal head writing position is moved a small amount between masters. The
amount is set with SP2-61 (T/H Swing Amount) automatically. This changes the side-to-side margin on the
master.
This prevents the same parts of the thermal head from being used all the time, because if masters that contain
the same image (such as a logo) are made frequently, this can burn out the thermal head.
Default: OFF
SP2-62: T/H Swing Amount
Settings: ± 1 to± 5 mm
1 2-5
30 30
Idling Idling
1
(Skip) (Skip)
30 30 30
The default is 7%. This means that during normal printing mode, the thermal
head energy is 93% of the maximum possible (100 – 7).
The default is 15%. This means that in economy printing mode, the thermal
head energy is reduced by another 15%. With the default settings, this
means that the thermal head energy is 85% of maximum power (100-15).
Setting of SP2-35: "5"
Idling 6
80 100
Setting of SP2-35: "2"
Idling Idling
2
(Skip) (Skip)
30 80
Service Program Mode
7 8
100 100
Idling
3
(Skip)
100 100 100
6
31