Singer SF40-55 WH Instruction Manual page 5

5. Loosen the base screw by turning counterclockwise from the base pipe, and
insert the base pipe down the base, the base screw through the base pole
by turning clockwise then tighten the base pipe and the base.
6. Put the base cap on the base, pull the inner pipe out then tighten the lock
nut again.
7. Loosen the control box screw (screw B) by turning counterclockwise, insert
the control box fi rmly down the inner pipe, and screw the control box screw
by turning clockwise.
Unscrew the blade cap by turning
clockwise & rear guard mounting
nut by turninng counnter clockwise
Slide blade on motor shaft
Bla Blade cap
Gu Guard nut
Fig. 1
Blade
Fig. 3
5
Put rear grille on motor shaft and
secure with guard nut
Rear grille
Shaft
Screw blade cap on shaft by
turning counnter clockwise
Blade cap
ENGLISH
Fig. 2
Fig. 4