Surfaces; Lights - Summit HC20BB Owner's Manual & Installation Instructions

Surfaces

Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will scratch the
surface.
Use warm sudsy water or a stainless steel cleaner or
polish to clean the stainless steel surface. Always wipe
the surface in the direction of the brush line. Follow
the cleaner instructions for cleaning the stainless steel
surface.
Painted Surfaces (on some models)
Do not use steel wool pads or other abrasive
cleaners; they will scratch the surface.
Clean grease-laden surfaces of the hood frequently. To
clean the hood surface, use a hot, damp cloth with a
mild detergent suitable for painted surfaces. About one
tablespoon of ammonia may be added to the water. Use
a clean, hot, damp cloth to remove soap. Dry with a dry,
clean cloth.

Lights

CAUTION
Allow lights to cool before touching.
On Some Models
1. Before attempting to replace the lights, make sure that
the light switch is turned off.
2. Remove the lightbulb's cover.
3. Unscrew the lightbulb counterclockwise and pull it
out to remove the lightbulb.
4. Replace the lightbulb with the same type of lightbulb
(standard incandescent), making sure the socket is
properly inserted into the housing of the lightbulb
holder.
Use only a liquid cleanser free of grit and rub in the
direction of the brush lines with a damp soft sponge.
To inquire about purchasing stainless steel appliance
cleaner or polish, or to find the location of a dealer
nearest you, please call us at 800-932-4267.
NOTE: When cleaning, take care not to come in contact
with filters and other surfaces.
CAUTION
When cleaning the hood surfaces,
be certain that you do not touch the light with moist
hands or cloth. A warm or hot light may break if
touched with a moist surface. Always let the light
cool completely before cleaning around it.
Light Cover
NOTE: A lightbulb is NOT included with this unit.
6