Advertisement

Quick Links

https://appliancetechmanuals.com
RANGE HOODS
Models
SEH4630
SEH4636
FELIX STORCH, INC.
770 Garrison Avenue
Bronx, New York 10474
www.summitappliance.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SEH4630 and is the answer not in the manual?

Questions and answers

Summary of Contents for Summit SEH4630

  • Page 1 RANGE HOODS Models SEH4630 SEH4636 FELIX STORCH, INC. 770 Garrison Avenue Bronx, New York 10474 www.summitappliance.com...
  • Page 2: Table Of Contents

    Technical Specifications..................6 purchase or delivery. Any parts determined to be defective will be replaced Dimensional Diagram...................7 by SUMMIT at no charge to you. Plastic parts, liners, and outer cabinets are Installation......................8-12 warranted to be manufactured to commercially acceptable standards and Positioning the Range Hood..............8...
  • Page 3: Safety Warnings

    https://appliancetechmanuals.com SAFETY WARNINGS WIRING DIAGRAM a. This product is designed for domestic use. Motor : 420 W / Lamp : 2x50w b. Electric input for the device must be 110-120 Volt, 60 Hz. INPUT : 110V AC / 60 Hz c.
  • Page 4 https://appliancetechmanuals.com v. If the electrical cable is defective, it must be changed by the manufacturer or a Model SEH4636 qualified service technician. Model No 3120.9.579.01 w. If there is a fire, cut off the power to the hood and cooking devices and cover Pos.
  • Page 5 https://appliancetechmanuals.com a. Use this unit only in the manner intended by the manufacturer. If you have EXPLODED VIEW questions, contact the manufacturer. b. Before servicing or cleaning the unit, switch power off at the service panel and SEH4636 3120.9.579.01 lock the service-disconnecting means to prevent power from being switched on Exploded View For 36"...
  • Page 6: Location Of Parts

    LOCATION OF PARTS Model SEH4630 Model No 3120.8.579.01 Pos. Part No. Spare Part YT971.1000.22 CARBON FILTER ALUMINUM CASSETTE FILTER YT142.2120.19 YT207.1000.35 CABLE FIXER(FOR CHIMNEY HOOD) YT201.1000.21 CIRCUIT BOX YT201.1000.22 CIRCUIT BOX COVER YT202.1000.16 METAL VALVE BLOWER YT460.1000.17 YT403.1000.10 HALOGEN LAMP-50W YT404.1000.24...
  • Page 7: Technical Specifications

    EXPLODED VIEW TECHNICAL SPECIFICATIONS SEH4630 Model SEH4630-SEH4636 3120.8.579.01 Exploded View For 30" Model Voltage(V) 110-120 V Lamp (W) 2 x 50 W Control Type Touch Button 420 W Motor Power (W) 650 CFM Capacity (CFM) Motor Insulation Class CLASS I...
  • Page 8: Dimensional Diagram

    Service and Spare Parts You can obtain service advice and spare parts for your product directly from SUMMIT by calling us at 1-800-932-4267 or by going to our website at www.summitappliance.com/support Have the model number of your range hood handy. This can be found on the product label, which can be seen when you remove the aluminum cassette filter.
  • Page 9: Installation

    30" for gas ranges min. 25" for electric ranges 50-W Halogen bulb Note: Replacement bulbs can be purchased directly from SUMMIT by calling us at PREPARING THE SITE 1-800-932-4267 or by going to our website at www.summitappliance.com/support. WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY, Have the model number of your range hood handy.
  • Page 10: Installing Mounting Brackets

    https://appliancetechmanuals.com CLEANING AND MAINTENANCE Disconnect the device prior to maintenance (cut off its power supply by turning off the switch). Fix the connector box to the motor junction plate with 2 pieces of 3,5 x 9,5 RYSB screws as shown. The aluminum cassette filter holds oils and dust from the air.
  • Page 11: Installing The Range Hood On The Wall

    https://appliancetechmanuals.com INSTALLING THE RANGE HOOD ON THE OPERATION WALL Peel off protective films from the stainless steel components after assembly. A)DRILLING OF HANGING HOLES PUSH-BUTTON CONTROLS Set the assembly scheme onto place where Your range hood has three levels of ventilation. According to your needs, you the product will be mounted and open the Ø10 can choose a low (|), medium (||) or high (|||) ventilation level by pushing one of...
  • Page 12 https://appliancetechmanuals.com WARNING! TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. Place metal chimneys over product body. D)MOUNTING THE PRODUCT ONTO WALL Hang the product on the already-mounted L-shaped hanging parts. Screw internal chimney on chimney fixing sheet, fixed over upper corner of external chimney.

This manual is also suitable for:

Seh4636

Table of Contents