Summit HC20BB Owner's Manual & Installation Instructions page 10

TOOLS AND MATERIALS REQUIRED
(NOT INCLUDED)
Pencil and tape measure
Spirit level
Electric drill, #2 Phillips,
flat head, and ⁄ " drill bit
9
32
Torx 10, 15, 20
driver
Aluminized
Duct tape
REMOVE THE PACKAGING
CAUTION
Wear gloves to protect against
sharp edges.
• Remove the hardware bag, literature package and
other boxed parts.
• Remove and properly discard the protective plastic
wrapping and other packaging materials.
Installation Preparation
Safety glasses
Wire cutter/stripper
UL listed wire nuts
Strain relief for
junction box
INSTALLATION DIMENSIONS
12"
X = Distance from hood to cooktop
X
(varies depending on installation)
Required Min. = 24"
Recommended Max. = 30"
34"-36"
Typical
1" = 2.5 cm; 1' = 0.3 m
10