Table of Contents
Advertisement
The selected riding mode is
activated after approx. 2 sec-
onds.
ANTI-THEFT ALARM SYSTEM
(DWA)
with anti-theft alarm system
(DWA)
OE
Activation
Turn on standby mode.
(
56)
Adjust the anti-theft alarm
system. (
67)
Turn off standby mode.
Press button 1 on the radio-
operated key twice.
Activation takes approximately
30 seconds to complete.
Turn signals flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm system is ac-
tive.
To deactivate the tilt sen-
sor (for example, if you are
about to transport the elec-
tric scooter on a train and the
strong movement of the mov-
ing train could trip the alarm),
press button 1 on the radio-
operated key again during the
activation phase.
Turn signals flash three times.
Confirmation tone sounds
three times (if programmed).
Tilt sensor is deactivated.
Alarm signal
The DWA alarm signal can be
triggered by:
Tilt alarm sensor
Switch-on attempt with an
unauthorized ignition key.
Disconnection of the DWA
from the vehicle battery (DWA
battery takes over the power
supply – alarm tone only, turn
signals do not flash)
65
Advertisement
Chapters
Table of Contents
