Monterey 180 Edge Owner's Manual page 63

Hide thumbs Also See for 180 Edge:
Table of Contents

Advertisement

Never exceed the recommended fuse sizes or bypass the fuse
safeguard. Always install the proper (type and rating) fuses
whenever replacing or changing fuses. Continuous
fuse/breaker failures indicate a severe problem and requires
immediate attention. Failure to install correct fuse may result in
damage to the electrical system or severe personal injury.
Some boat models have each individual circuit protected with a circuit
breaker located next to the switch. To reset a tripped circuit breaker, switch
OFF the circuit, wait about one
minute for the breaker to cool, push
the breaker button fully, and switch
ON the circuit.
Some boat models have circuits
protected by fuses. If the fuse
should blow-out, locate the fuse
block behind the instrument panel.
Use a fuse removal/installation tool
to replace the fuse.
NOTICE
The electrical system is
designed to protect you
from short circuits and
overload. Any modifications
to the system, such as
adding electrical acces-
sories, should be done by a
qualified technician.
TYPICAL IN-LINE FUSE HOLDER
(TWIST AND PULL TO OPEN)
Sport Boat
Care and Maintenance
!
WARNING
KC-1640
5
5
5
5
5
AUTOMOTIVE STYLE
FUSE PANEL
Some installed accessories,
such as the stereo, have an
additional fuse located in the
positive lead of the stereo.
Some in-line fuse holders can
be found near the battery.
5
5
5
5
5
KC-1635
7-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents