Suzuki NEXA FRONX Owner's Manual & Service Booklet page 62

FOR SAFE DRIVING
NOTICE
When installing a child restraint sys-
tem to the rear seat, adjust the front
seat position so that the front seat
does not interfere with the child
restraint system.
Installation of Child Restraint with
Top Tether
55T020380
Some child restraint systems require the
use of a top tether strap. Top tether anchor-
ages are provided in your vehicle at the
locations shown in the illustrations.
The number of the top tether anchorage
brackets provided in your vehicle depends
2-35
on the vehicle specification. Install the child
restraint system as follows:
1) Remove the luggage compartment
cover (if equipped).
2) Secure the child restraint on the rear
seat using the procedure described
above for securing a restraint system
that does not require a top tether strap.
3) Hook the top tether strap to the top
tether anchorage and tighten the top
tether strap according to the instruc-
tions provided by the child restraint sys-
tem manufacturer. Attach the top tether
strap to the corresponding top tether
anchorage located directly behind the
child restraint. Do not attach the top
tether strap to the luggage restraint
loops (if equipped).
WARNING
Do not attach the child restraint top
tether strap to the luggage restraint
loops. Incorrectly attached top tether
strap will reduce the intended effec-
tiveness of the child restraint system.
52RS20431
4) When routing the top tether strap, pass
the top tether strap as shown in the
illustration. (Refer to "Head Restraints"
section for details on how to adjust the
height of head restraint or remove it.)
5) Check that cargo does not interfere
with routing of the top tether strap.
WARNING
If the seat belt, etc. gets stuck in the
child restraint system, it may not be
secured properly and this may cause
severe injury to a child in a collision.
When you install the child restraint
system, check that obstacles and the
seat belt do not exist near the ISOFIX
anchorages and the top tether
anchorages.
55TH0-74E