Suzuki NEXA FRONX Owner's Manual & Service Booklet page 61

1) When the child restraint system con-
tacts the head restraint, adjust the
height of the head restraint or remove it
for fitting the child restraint system.
WARNING
If the child restraint system contacts
the head restraint, the child restraint
system cannot be secured firmly.
This may cause severe injury to a
child in a collision.
When installing the child restraint
system, adjust the head restraint
height to the highest position as
much as possible or remove the head
restraint so that the child restraint
system would not contact the head
restraint.
(1)
(3)
55T020370
2) Place the child restraint in the rear seat,
inserting the connecting bars (3) to the
lower anchorages (1) between the seat
cushion and the seatback.
3) Use your hands to carefully align the
connecting bar tips with the anchor-
ages. Take care not to pinch your fin-
gers.
FOR SAFE DRIVING
4) Push the child restraint toward the anchor-
ages so that the connecting bar tips are
partially hooked to the anchorages. Use
your hands to confirm the position.
68LM268
5) Grasp the front of the child restraint and
push the child restraint forcefully to
latch the connecting bars. Check that
they are securely latched by trying to
move the child restraint system in all
directions, especially forward.
6) Attach the top tether strap referring to
"Installation of child restraint with top
tether" section.
When you put your child in the child
restraint system, appropriately slide the
front seat forward not to touch a part of
your child's body.
54G184
54G185
2-34
55TH0-74E