Suzuki NEXA FRONX Owner's Manual & Service Booklet page 229

OPERATING YOUR VEHICLE
1) Turn on the cruise control system by
pushing cruise switch (1). When the
cruise indicator light (4) (for instrument
cluster type A), cruise indicator (6) (for
instrument cluster type B) comes on,
you can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push down the "RES +/SET –" switch
(3), "SET" indicator light (5) (for instru-
ment cluster type A), "SET" indicator (7)
(for instrument cluster type B) comes
on. Also, set speed indication (8) (for
instrument cluster type B) comes on at
the same time. Take your foot off the
accelerator pedal and the set speed will
be maintained.
WARNING
If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.
Turn off the cruise control system
and check that cruise indicator light
(4), cruise indicator (6) or (8) is off
when the system is not in use.
NOTE:
Established cruising speed may differ a lit-
tle from the speed meter indication
depending on the road conditions.
5-65
Changing Speed Temporarily
When the cruising speed is maintained, you
can temporarily accelerate or decelerate.
To accelerate, depress the accelerator
pedal. When you take your foot off the pedal,
your vehicle will return to the set speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and "SET"
indicator light (5), "SET" indicator (7) will
go off.
To resume the previously set speed, push
up the "RES +/SET –" switch (3) and turn
on "SET" indicator light (5), "SET" indicator
(7) again when vehicle speed is above 40
km/h. The vehicle will accelerate to the
previously set speed and maintain its
speed.
NOTE:
For Automatic Transmission vehicle / Auto
Gear Shift vehicle, when the cruising
speed is maintained, you cannot deceler-
ate by using the engine brake even if you
downshift from higher gear to 3rd in the
manual mode.
To decelerate while the cruise control is
on, depress the brake pedal or push down
the "RES +/SET –" switch (3).
Changing Cruising Speed
Using the accelerator pedal
To reset at a faster cruising speed, acceler-
ate to the desired speed using the accelera-
tor pedal and push down the "RES +/SET –"
switch (3). The new speed will be main-
tained.
Using the brake pedal
To reset at a slower cruising speed, decel-
erate to the desired speed using the brake
pedal and push down the "RES +/SET –"
switch (3). The new speed will be main-
tained.
NOTE:
When the brake pedal is depressed, "SET"
indicator light (5), "SET" indicator (7) will
go off until you reset the cruising speed.
Using "RES +/SET –" switch
To reset at a faster cruising speed, press
repeatedly or hold push up the "RES +/
SET –" switch (3). Vehicle speed will
steadily increase. When you release the
switch, the new speed will be maintained.
To reset at a slower cruising speed, press
repeatedly or hold push down the "RES +/
SET –" switch (3) until the vehicle has
slowed to the desired speed, and then
release the switch. The new speed will be
maintained.
55TH0-74E