Suzuki NEXA FRONX Owner's Manual & Service Booklet page 367

(3) Removal
(4) Installation
2) To remove the bulb of the front turn sig-
nal light (1) from the bulb holder, push
in the bulb and turn it counterclockwise.
To install a new bulb, push it in and turn
it clockwise. To remove and install the
bulb of the front position light (2), simply
pull out or push in the bulb.
Daytime Running Light (D.R.L.) (if
equipped)
For DRL replacement, we recommend you
to take your vehicle to the Maruti Suzuki
authorized workshop as special procedure
for the same is required.
Rear Combination Light
For Rear Combination Light replacement,
we recommend you to take your vehicle to
the Maruti Suzuki authorized workshop as
special procedure for the same is required.
License Plate Light
Since special procedures are required, it is
recommended that you take your vehicle
to a Maruti Suzuki authorized workshop for
light replacement.
High Mount Stop Light
Since special procedures are required, it is
recommended that you take your vehicle
to a Maruti Suzuki authorized workshop for
light replacement.
Interior Light
Front (if equipped)
(1)
(2)
55T090450
1) To prevent scratches, insert a commer-
cially available flat-blade screwdriver
covered with a soft cloth into the notch
(1), and then remove the lens (2).
(3)
(4)
55T090040
(3) Removal
(4) Install
INSPECTION AND MAINTENANCE
2) Pull the bulb out and then insert a new
one.
3) After replacing the bulb, install the front
interior light lens in the reverse order of
removal.
Center
(1)
(2)
55T090460
1) To prevent scratches, insert a commer-
cially available flat-blade screwdriver
covered with a soft cloth into the notch
(1), and then remove the lens (2).
55TH0-74E
9-32