Suzuki NEXA FRONX Owner's Manual & Service Booklet page 60

FOR SAFE DRIVING
Securing Child Restraint System by
ISOFIX
Securing
(1) (1)
55T020350
(1) Lower anchorage
Your vehicle is equipped with the lower
anchorages in the rear seat outboard seat-
ing positions for securing a ISOFIX type of
child restraints with the connecting bars.
The lower anchorages are located where
the rear of the seat cushion meets the bot-
tom of the seatback.
WARNING
Install the ISOFIX type of child
restraint(s) in the only outboard seat-
ing positions, not in the central posi-
tion for the rear seat.
2-33
Install the ISOFIX type child restraint sys-
tem according to the instructions provided
by the child restraint system manufacturer.
After installation, try moving the child
restraint system in all directions especially
forward to check that connecting bars are
securely latched to the anchorages.
(2)
55T020360
(2) Top tether anchorage
Your vehicle is equipped with the top tether
anchorages. Use the top tether strap of the
child restraint according to the instructions
provided by the child restraint system man-
ufacturer.
Here is a general instruction:
CAUTION
If your vehicle is equipped with the
head restraint, adjust the height of
the rear head restraint or remove it
for fitting the child restraint, as nec-
essary. However, if a booster cushion
not equipped with the head restraint
is fitted, the head restraint should not
be removed. If the head restraint is
removed for fitting the child restraint,
you need to install it again after
removing the child restraint.
If the child restraint is fitted improp-
erly, a child sitting in it could be
injured in a collision.
NOTE:
Stow the removed head restraint in the lug-
gage compartment so it will not cause
inconvenience to the occupants.
55TB02014
55TH0-74E