Suzuki NEXA FRONX Owner's Manual & Service Booklet page 366

INSPECTION AND MAINTENANCE
(3)
(4)
(5)
68PM00718
(4) Removal
(5) Install
3) To remove and install the bulb of the
side turn signal light (3), simply pull out
or push in the bulb.
Outside Rearview Mirror Type
(if equipped)
LED module is used. Since special proce-
dures are required, we recommend you
take your vehicle to your Maruti Suzuki
authorized workshop for LED module
replacement.
9-31
Front Turn Signal Light and
Front Position Light
Vehicle with the LED
For vehicle with the LED, Front turn signal
light and front position light replacement,
we recommend you to take your vehicle to
the Maruti Suzuki authorized workshop as
special procedure for the same is required.
Vehicle with the bulb
(2)
(1)
74TB09011
1) Open the engine hood. To remove the
bulb holder of the front turn signal light
or the front position light from the light
housing, turn the holder counterclock-
wise and pull it out.
(2)
(3)
(4)
(1)
68PM00721
55TH0-74E
(1)
(2)