Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Goldair PLATINUM GPOC3310
Summary of Contents for Goldair PLATINUM GPOC3310
- Page 1 Operating Instructions 10 Fin Oil Column Heater Model: GPOC3310...
- Page 2 This page has intentionally been left blank.
- Page 3 General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 4 General Care and Safety Guide • Never use the appliance to dry clothes. • Always unplug appliance when not in use. • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
- Page 5 General Care and Safety Guide • The appliance must not be immersed in any liquids. • There are no user serviceable parts installed in the unit. • Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
- Page 6 Assembly WARNING: Heater must not be used without the castor plates and castors fitted. Before first use you need to set the castor wheels to the widest position. To do this slide each wheel out from the main body until they cannot go any further and then tighten the screws to lock them in position.
- Page 7 Operating Your Oil Column Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
-
Page 8: Thermostatic Control
Operating Your Oil Column Heater HEAT CONTROL SWITCH Check that the heat control switch is set to Off position before plugging the heater into the mains supply. The control switch positions are: LOW Low heat setting MED Medium heat setting HIGH High heat setting For greater economy, use the High Heat setting initially and then switch to the Lower Heat settings. - Page 9 Operating Your Oil Column Heater TIMER You must set the time prior to programming the Timer. To do this; turn the outer dial of the timer in a clockwise direction until the time of the day (24-hour clock) corresponds with the triangular marking. Example if it is 2pm (1400 hours) then set the triangular mark in line with 14.
- Page 10 When disposing of the appliance, follow the regulations concerning disposal of oil. PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm...
-
Page 11: Three Year Warranty
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. - Page 12 New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.au...
Need help?
Do you have a question about the PLATINUM GPOC3310 and is the answer not in the manual?
Questions and answers