General Care and Safety Guide Thank you for choosing a Goldair Panel Heater. This Goldair Heater has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service.
Page 3
Components CONTROL PANEL HEAT OUTLET AIR INLET CASTOR WHEEL BRACKET POWER SWITCH CASTORS WHEELS WALL MOUNTING BRACKET...
Installing Your Panel Heater FREE STANDING Ensure the heater is unplugged and power switches are off. Set heater upside down. Align the screw hole on the Castor Wheel bracket with the screw hole on the base of the heater. Attach Castor wheel bracket with the winged screws provided and ensure the bracket sits firmly in place (do not over tighten).
Operating Your Panel Heater CONTROL PANEL All Models Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed form the unit before use. Check that the heater is switched off before plugging into the mains supply.
PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. (Refer to back of booklet). SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm...
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
Need help?
Do you have a question about the GPPH500 and is the answer not in the manual?
Questions and answers