Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvet Professional ROGUE R1 BEAM WASH
Summary of Contents for Chauvet Professional ROGUE R1 BEAM WASH
- Page 1 User Manual Model ID: ROGUER1BW...
- Page 2 Edition Notes The Rogue R1 Beam Wash User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Rogue R1 Beam Wash as of the release date of this edition. Trademarks CHAUVET, the Chauvet logo and Rogue R1 Beam Wash are registered trademarks or trademarks of Chauvet &...
-
Page 3: Table Of Contents
Configuration (DMX)................Control Personalities................Starting Address ..................Control Channel Assignments and Values .......... Color Chart ....................21CH......................19CH......................15CH......................14CH......................Configuration (Settings)............... Pan Reverse .................... Tilt Reverse....................Pan Angle ....................Tilt Angle....................Rogue R1 Beam Wash User Manual Rev. 3... - Page 4 Factory Reset ..................Test Mode.................... Auto Test ....................Manual Test ..................... System Information................Offset Mode (Zero Adjust) ..............5. Maintenance................Product Maintenance................6. Technical Specifications ............7. Returns..................8. Contact Us .................. Rogue R1 Beam Wash User Manual Rev. 3...
-
Page 5: Before You Begin
Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs. All applicable local codes and regulations apply to proper installation of this product. Rogue R1 Beam Wash User Manual Rev. 3 Page 1 of 24... -
Page 6: Personal Safety
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Page 2 of 24 Rogue R1 Beam Wash User Manual Rev. 3... -
Page 7: Introduction
2. Introduction Description The Rogue R1 Beam Wash is a versatile and compact moving head that projects a punchy beam and wash. Weighing just under 12 lbs., it features a custom-designed optical system with seven 40W RGBW LEDs and a zoom range of 3.4° to 67.7° that allows it to project tight, solid beam effects at its most narrow and transforms the light source into an even wash with excellent color blending as it expands. -
Page 8: Product Dimensions
3.36 in 85 mm 5.67 in 144 mm 8.42 in 214 mm When designing case inserts, make sure the dimensions are given with the zoom out, as shown above. Page 4 of 24 Rogue R1 Beam Wash User Manual Rev. 3... -
Page 9: Setup
3. Setup AC Power The Rogue R1 Beam Wash has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. -
Page 10: Mounting
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity. Procedure The Rogue R1 Beam Wash comes with a bracket to which you can attach a mounting clamp directly. Mounting clamps are sold separately. Make sure the clamps are capable of supporting the weight of this product. -
Page 11: Operation
<ENTER> Navigates downward through the menu list or decreases the numeric value when in a function Control Options Set the Rogue R1 Beam Wash starting address in the 001–512 DMX range. This enables control of up to 24 products in the 21-channel 21CH personality. - Page 12 Custom 100–255 value Sets blue LED maximum BLUE value Pan/Tilt Reset Reset individual functions or Zoom Function all functions from start-up Reset to factory default Factory Set settings Page 8 of 24 Rogue R1 Beam Wash User Manual Rev. 3...
-
Page 13: Configuration (Dmx)
The highest recommended starting address for 15CH is 498. • The highest recommended starting address for 19CH is 494. • The highest recommended starting address for 21CH is 492. Rogue R1 Beam Wash User Manual Rev. 3 Page 9 of 24... -
Page 14: Control Channel Assignments And Values
208 229 Reverse color scroll, fast to slow Various Various Various Various 230 234 No function 235 249 Color snap, fast to slow Various Various Various Various 250 255 No function Page 10 of 24 Rogue R1 Beam Wash User Manual Rev. 3... -
Page 15: 21Ch
000 255 Fine control (16-bit) White 000 255 0–100% Fine White 000 255 Fine control (16-bit) Color 000 255 See the Color Chart Zoom 000 255 0–100% Rogue R1 Beam Wash User Manual Rev. 3 Page 11 of 24... - Page 16 175 179 Color calibration off (single color) 180 184 Color calibration on (single color) 185 239 No function 240 247 Color calibration on 248 255 Color calibration off Page 12 of 24 Rogue R1 Beam Wash User Manual Rev. 3...
-
Page 17: 19Ch
000 255 Fine control (16-bit) White 000 255 0–100% Fine White 000 255 Fine control (16-bit) Color 000 255 See the Color Chart Zoom 000 255 0–100% Rogue R1 Beam Wash User Manual Rev. 3 Page 13 of 24... - Page 18 175 179 Color calibration off (single color) 180 184 Color calibration on (single color) 185 239 No function 240 247 Color calibration on 248 255 Color calibration off Page 14 of 24 Rogue R1 Beam Wash User Manual Rev. 3...
-
Page 19: 15Ch
Green 000 255 0–100% Blue 000 255 0–100% White 000 255 0–100% Color 000 255 See the Color Chart Zoom 000 255 0–100% Rogue R1 Beam Wash User Manual Rev. 3 Page 15 of 24... - Page 20 175 179 Color calibration off (single color) 180 184 Color calibration on (single color) 185 239 No function 240 247 Color calibration on 248 255 Color calibration off Page 16 of 24 Rogue R1 Beam Wash User Manual Rev. 3...
-
Page 21: 14Ch
Green 000 255 0–100% Blue 000 255 0–100% White 000 255 0–100% Color 000 255 See the Color Chart Zoom 000 255 0–100% Rogue R1 Beam Wash User Manual Rev. 3 Page 17 of 24... -
Page 22: Configuration (Settings)
To set the maximum angle of the tilt: 1. Go to the Setup main level. 2. Select the Tilt Angle option. 3. Select from 230 (230°), 180 (180°), or 90 (90°). Page 18 of 24 Rogue R1 Beam Wash User Manual Rev. 3... -
Page 23: Fan Mode
Rogue Wash product(s). This ensures an equal output and color balance from each product. 4. Repeat steps 2 and 3 until the output of the Rogue R1 Beam Wash is identical to the output of the legacy Rogue Wash product(s). -
Page 24: Color Calibration
2. Select the Factory Set option. Test Mode Auto Test To have the Rogue R1 Beam Wash automatically test all functions one after the other: 1. Go to the Run Mode main level. 2. Select the Auto Test option. Manual Test To manually test an individual function of the Rogue R1 Beam Wash: 1. -
Page 25: Maintenance
7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Do not spin the cooling fans with compressed air. Damage may result. Rogue R1 Beam Wash User Manual Rev. 3 Page 21 of 24... -
Page 26: Technical Specifications
14, 15, 19 or 21 Ordering Product Name Item Name Item Code UPC Number Rogue R1 Beam Wash ROGUER1BW 08011620 781462219680 UL 1573 CSA C22.2 No. 166 E113093 Page 22 of 24 Rogue R1 Beam Wash User Manual Rev. 3... -
Page 27: Returns
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Rogue R1 Beam Wash User Manual Rev. 3 Page 23 of 24... -
Page 28: Contact Us
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Page 24 of 24 Rogue R1 Beam Wash User Manual Rev. 3...