Stamina Airgometer 1100 Owner's Manual page 12

Hide thumbs Also See for Airgometer 1100:

Table of Contents

ASSEMBLY INSTRUCTIONS

STEP 10

Attach the SEAT(70) to the SEAT POST(4) with NYLOCK NUTS(M8x1.25)(92) and WASHERS(M8)(96).

Insert the SEAT POST(4) into the MAIN FRAME(1) and secure with the ADJUSTMENT KNOB(72).

NOTE: The pin of the ADJUSTMENT KNOB(72) must be inserted into one of the adjustment holes in the

SEAT POST(4) and the ADJUSTMENT KNOB(72) must be screwed in tight to ensure that the

SEAT POST(4) will fit securely in the MAIN FRAME(1).

STEP 11

Install two AA batteries into the METER(37), the batteries are not included. See page 15 for detailed

battery installation instructions. Plug the CONNECTION WIRE(38) into the METER(37), and push

the excess wires back into the METER POST(5). Slide the METER(37) onto the plate on the METER

POST(5). Be careful not to damage the wires when attaching the METER(37).

STEP 12

Place the WATER BOTTLE(79) in the WATER BOTTLE HOLDER(78).

Table of Contents

15-1100a