Table of Contents
Advertisement
Service and repairs, trouble shooting
• All users must be informed about imminent service and repairs for the device.
• All of the device's pre- or post- switched machine parts and operating mediums, e.g. electricity,
must be disengaged to prevent accidental start-up.
• Whenever inspection, service, or repair work is done, the device must be disconnected from the
main power supply and the main switch must be locked to prevent unexpected re-starting.
- Lock and remove the key from the main power switch, if possible.
- Attach a sign to the device indicating the device cannot be switched on.
• Larger devices must be carefully mounted and secured on lifting gears during replacement.
• Check loosened screw connections for a compact seat.
• Upon completion of the service work, the safety apparatus of the device must be checked and
verified.
Constructive modifications on the BB-86
• It is forbidden to add components or make modifications to the device without written authorisation
from the manufacturer, Minelli Corp. (MIRA®). This also applies to welded components.
• All constructive modifications require a written approval from the Minelli Corp. (MIRA®)
Switzerland
• Faulty device parts may only be replaced by original replacement parts.
• Only use original genuine MIRA® replacement parts.
- By using replacement parts from third party suppliers, there is no guarantee that the parts are
constructed for the required operational demands and the required safety functions.
Cleaning of the BB-86 and disposal of wastes
• Waste materials and by-products must be correctly handled and removed especially when:
- working on greasy systems- and devices
- cleaning with solvents
• The external surface of the BB-86 must be cleaned on a regular basis with a dry flannel cloth.
Only use industrial cleaner if the device is necessary polluted
• Further cleaning per grade of using and grade of pollution of the device.
• The packaging material used to ship the BB-86 must be disposed of correctly in the respective
waste container and/or according to local environmental regulations!
Noise emission of the device
• The sound pressure level emitted by the BB-86, BB-86 Giant and BB-86 Mini, is rated at 30dB(A)
• When the BB-86 is used in combination with the Vario Drive System, there is a sound pressure
level up to 70dB(A) emitted from the Vario Drive.
Safety advisory for transporting the device
• When transporting the BB-86, the device must be shipped in the original carrying case that it
arrived in when it was delivered from the Minelli Corporation.
• The BB-86 must be protected against damages by the transportation company.
• Typical transportation damages such as dropping or crushing can be avoided by appropriately
packing and securing the shipment.
• The MINELLI Corporation will not be liable for inadequate precautions to secure the shipment.
19 July 2023/v1.7
BB-86 | Serial-No. 865 / 0609 ©
6
(All rights reserved)
Advertisement
Table of Contents
