Mira BB-86 Mini Instruction Manual page 5

Warranty and liability
Warranty issues are described in MIRA's terms of sales and return policy conditions, and are an
integral part of any sales contract between MIRA and the customer. Warranty and liability claims are
void if the injuries or damages resulted from any of the following causes:
➢ Non-designated use of the device
➢ Incorrect mounting and operation
➢ Failure to follow the guidelines in the instruction manual with regard to the transport, storage,
assembly, initial start-up operation and servicing of the device
➢ Unauthorized manipulation of the device
➢ Unauthorized alteration of the BB-86 (for example: modifications to the magnetic plate or
switches, mechanical components, electrical components or circuitry)
➢ Poor monitoring of the device components which are wear out
➢ Incorrectly executed repairs
➢ Unforseen disasters by external-material influence and force majeure
Symbols and advisory notations
The following symbols and descriptions are used to emphasize safety risks in this instruction manual:
Warning notice – General danger: Indicates a potentially dangerous situation which can
result in minor to severe injuries including death if the safety guidelines are not followed.
Warning notice – Danger of an electrical shock: Indicates a dangerous situation which can
result in an electrical shock and severe burns or death if the safety guidelines are not followed.
Warning notice – Danger of pinching fingers and hands: Indicates a potentially dangerous
situation which can result in minor to severe injuries to fingers and hands if the safety
guidelines are not followed.
Info – notice: Shows Information and/or comments which are important for the appropriate
use of the machine and its functionality.
Application – notice: Shows accessories and additional application features of the machine.
Organisational provisions
• The operator must ensure the required safety-equipment is set-up properly.
• All safety devices must be checked at regular intervals.
Protection-apparatus
• Before initial start-up of the device, all protection-apparatus must be correctly installed and
functioning.
• Protection devices may be removed only
- after shutdown and
- after steps have been taken to prevent the device from re-starting
• Replacement of protection-devices by the operator must be installed in accordance with the
regulations.
19 July 2023/v1.7 BB-86 | Serial-No. 865 / 0609 ©
4
(All rights reserved)