Basic Safety Guidelines - Mira BB-86 Mini Instruction Manual

Basic Safety Guidelines

Important information about the instruction manual
• A thorough knowledge and understanding of the basic safety guidelines and safety regulations
(shown on page 2) are key conditions for the safe operation of this device.
• This instruction manual contains important guidelines how to safely use this device.
• All persons who use this device must carefully follow the steps as outlined in this instruction
manual.
• In addition, local regulations related to safety and accident prevention must also be followed.
Responsibility of the tool owner
The tool owner will only allow employees to use the tool if they:
• have an intimate understanding of the basic guidelines for working safety and accident prevention.
• have been instructed about the proper device application.
• have read and understood the safety guidelines and warning notices in the instruction manual.
In addition, the tool owner will follow up with tool users at regular intervals to ensure tool safety
awareness.
Responsibility of the employees
The employees who use the device must commit to the following before they begin using the tool:
• that they will observe the basic safety guidelines for work safety and accident prevention.
• that they have read, understood, and signed the safety guidelines and warning notices in the
instruction manual.
Operating risks
The devices, BB-86, BB-86 Giant and BB-86 Mini, have been developed based on the latest state-
of-the-art technology, and were manufactured in accordance with the governing safety regulations.
However, it is possible by using these devices that some risks could appear for the user or third
persons if the devices are not operated according to the MIRA instruction manual, or if they are
misused. These tools should be used only:
• for its designated use.
• in good working order.
Breakdowns or malfunctions need to be corrected immediately if they deviate from the safety
guidelines.
Conventional utilisation
The MIRA BB-86 device is designed exclusively for processing sleeve counterbores on combustion
engines, and is not intended for any other use. The Minelli Corporation will not be liable for damages
which occur from unintended uses.
The intended utilisation also includes the following points:
• the user must comply with all the safety guidelines shown in the instruction manual, and
• the device owner must keep a record of the service work performed on the device.
19 July 2023/v1.7 BB-86 | Serial-No. 865 / 0609 ©
3
(All rights reserved)