Table of Contents
Advertisement
Figure 5
Figure 6
Figure 8
19 July 2023/v1.7
3. Vertical feed with advancing mechanism
Adjusts the depth of the turning tool. Figure 5
Vernier is adjustable to 0 (See step 14 on page 25)
1 Revolution = 1mm
1 Graduation mark = 0.01mm (1/100mm)
4. Bow
For inserting, removing and quick setting of the turning
tool. Figure 6 and Figure 7
5. Horizontal feed with gear bushing
By firmly holding the gear bushing and simultaneously
turning the crank handle, a horizontal feed of 0.15mm
per revolution is achieved by means of a planetary
gear and a plano-thread. A reduced cross feed speed
can be obtained by pressing the fingers against the
gear bushing. Figure 8
BB-86 | Serial-No. 865 / 0609 ©
Figure 7
15
(All rights reserved)
Advertisement
Table of Contents
