Table of Contents
Advertisement
5 Working process
For perfect results, the following points are essential:
•
The unit must be well grounded
•
The unit must be clean
•
The set up area must be absolutely clean
Figure 9
Figure 10
Figure 11
19 July 2023/v1.7
1. In order to insert the turning tool into the channel of the
main spindle, the advancing mechanism must be
advanced (loosen locking screw) until the upper side
of the main spindle extends past the magnetic base.
Figure 9
2. Push the bow and insert the turning tool with the thread
on the upper side, so that the centering roll stays on
the side of the main spindle which is marked with "R".
Figure 10
3. Attach the crank handle and tighten the worm screw.
Figure 11
BB-86 | Serial-No. 865 / 0609 ©
WARNING!
The BB turning tool has sharp
and pointed edges and must be
handled carefully.
In addition, the magnetic base
poses a risk of pinching hands or
fingers
if
they
are
between the activated magnetic
base
and
the
motor
surface!
21
(All rights reserved)
caught
block
Advertisement
Table of Contents
