Technical Information
Customer Accessible Inputs and Outputs
Serial Connector
Use the SERIAL connector on the Rear Panel to interface the leak detector to a PC
via an isolated RS-232 connection. Table A-5 and Figure A-1 provide details of the
connection. A typical connection from a 9-pin PC serial connector requires a
female-to-female, 9-pin, null modem cable, where pins 2 and 3 are crossed.
Table 27 Serial Connector Summary
Pin
2
3
5
Figure 85 Serial Connector Map
Agilent Helium Leak Detector User Manual
EIA Name
Received Data
Transmit Data
Signal Common
Description
Data into the leak detector
Data out of the leak detector
RS-232 Ground
2 3
5
157