Table of Contents
Advertisement
Hill Start Control brake failure
4
It is essential to apply the
brakes manually to hold the
86
vehicle.
NOTICE
Hill Start Control is purely a com-
fort system to facilitate holding
the machine and pulling way
on uphill gradients and should
not be confused with a parking
z
brake.
Operate the parking brake
lever 1 with force and release it
again quickly.
The holding symbol is dis-
played.
Hill Start Control has been ac-
tivated.
To switch off Hill Start Con-
trol, operate the parking brake
lever 1 again.
The holding symbol disap-
pears.
Or drive off in first or second
gear.
NOTICE
Hill Start Control is deactivated
automatically when the motor-
cycle pulls away.
General warning light
flashes yellow.
The holding symbol flashes
briefly.
Once the brake has been
fully released, the holding
symbol disappears.
Hill Start Control has been
switched off.
See the section entitled "En-
gineering details" for more in-
formation on Hill Start Control.
Hill Start Control function
(
157)
Anti-theft alarm (DWA)
Activation
with alarm system (DWA)
Switching on ignition (
Customising anti-theft alarm
settings (
89).
Switch off the ignition.
If the alarm system is activated,
then the alarm system will be
automatically activated when
the ignition is switched off.
OE
56).
Advertisement
Table of Contents
