Table of Contents
Advertisement
DTC intervention lasts. This af-
3
fords the rider visual feedback on
control intervention even after the
50
critical situation has been dealt
with.
DTC self-diagnosis not
completed
with riding modes Pro
DTC indicator and warning
light flashes slowly.
Possible cause:
DTC self-diagnosis not
completed
z
The DTC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed with the en-
gine running for the wheel-
speed sensors to be checked:
min 5 km/h)
Pull away slowly. Bear in mind
that the DTC function is not
available until self-diagnosis has
completed.
DTC switched off
with riding modes Pro
DTC indicator and warning
OE
light shows.
Off!
Traction control de-
activated.
Possible cause:
The rider has switched off the
DTC system.
DTC Switching on (
DTC fault
with riding modes Pro
DTC indicator and warning
light shows.
Traction control
failure! Onward
journey possible.
Ride carefully to next
specialist workshop.
Possible cause:
OE
The DTC control unit has detec-
ted a fault.
ATTENTION
Damaged components
Damage to sensors, for example,
which causes malfunctions
Do not transport any objects
underneath the driver or pas-
senger seat.
Secure the toolkit.
Do not damage the angular
74).
rate sensor.
Bear in mind that the DTC
OE
function is not available or the
functionality is subject to cer-
tain restrictions.
You can continue to ride. Pay
attention to the more detailed
Advertisement
Table of Contents
