Table of Contents
Advertisement
Brake-pad wear limit,
front
1.0 mm (Friction pad only,
without backing plate. The
wear indicators (grooves) must
be clearly visible.)
If the wear indicating marks are
no longer clearly visible:
WARNING
Brake-pad thickness less
than permissible minimum
Diminished braking effect, dam-
age to the brakes
In order to ensure the depend-
ability of the brake system, do
not permit the brake pads to
wear past the minimum per-
missible thickness.
Have the brake pads replaced
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Check the rear brake pad
thickness
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Visually inspect the brake pads
to ascertain their thickness.
Viewing direction: between
spray guard and rear wheel to-
ward brake pads 1.
9
165
z
Advertisement
Table of Contents
