Table of Contents
Advertisement
down until the desired entry is
highlighted.
To move the cursor up in lists,
turn the multi-controller 1 up
until the desired entry is high-
lighted.
Confirm selection.
Select the desired entry.
Briefly press the multi-control-
ler 1 to the right.
Call up the last menu used
In Pure Ride view: press and
hold the MENU rocker button.
The last menu used is called
up. The last entry highlighted
is selected.
Change of operating focus
with preparation for navigation
OE
system
If the Navigator is connected, it
is possible to switch between
operation of the Navigator and
the TFT display.
Change the operating
focus
with preparation for navigation
OE
system
Secure the navigation device
(
200).
Display Pure Ride view (
Press and hold MENU rocker
button up.
Operating focus switches to
the Navigator or TFT display.
The active device is marked on
the left-hand side of the top
status line. Operating actions
relate to the active device until
the operating focus is changed
again.
Operating navigation system
(
201)
System status displays
The system status is displayed in
the lower area of the menu if a
function is switched on or off.
99).
Examples of what the system
statuses mean:
System status 1: ASC/DTC
function is switched on.
5
101
z
Advertisement
Table of Contents
