Table of Contents
Advertisement
Telescopic slides (special accessory)
Installation
The telescopic slides are installed as follows:
1. Put the inserting bar of the
telescopic slide into the hole.
2. Align the front recess with the
front screw hole. Turn a screw
in and tighten both screws.
Repeat the procedure for the
second telescopic slide arm.
3. Trays and shelves must be
placed on the telescopic slide
arms with care so as to avoid
any accidental tipping over.
To prevent this, place trays
and shelves on the telescopic
slide arms as shown in the
illustration below, so that the
securing pins on the slide
arm catch the tray or shelf to
prevent any slipping.
21
Advertisement
Table of Contents
