Table of Contents
Advertisement
Appendix 2
● The "sys.ini" file example
The "sys.ini" file configures the following definitions.
- Number of Ethernet interfaces in the WV-ASC970 Server
- IP Address of each Ethernet interface
- WJ-SX850 Frame definitions
- Process interface assignment
- OSD control settings
- OSD Time & Date format definitions
- Unit ID for multiple domains
- Log settings
- Alarm text display settings
- Routing definitions
- RS232C port definitions for redundant system
- Retrieve and delete timing definitions for WV-ASM970 Time-Line feature
Text appearing in blue is explanatory, and not part of the "sys.ini" file.
INTERFACES section
Note:
• The WV-ASC970 Server can support up to three Ethernet network interfaces.
• When support the existing SX850/SX650 analog matrix switcher with MPU850/855/955A system, it is necessary
to change the following IP addresses to meet the system.
[INTERFACES]
***{ Number of interfaces in the system}
Numinterfaces=3
The number used here is the number of the Ethernet ports on WV-ASC970 Server.
***{ Interface Definitions
***{ Interface<Number>=<IPA>,<SUBNET MASK>,<BOOT SERVER IPA> }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU
***{
hardware settings in order for the System to
***{
operate correctly!!
***{ MainA CPU }
In Standard System, the WV-ASC970 Server should use the IP addresses that follow. In this case, the
{MainB CPU}'s interface numbers should be commented with asterisks.
Interface0=172.16.192.1,255.255.0.0,172.16.192.1
Interface0 is an interface for i-PRO devices.
Interface1=172.18.0.1,255.255.0.0,172.18.0.1
Interface1 is an interface for system controller.
Interface2=192.168.200.200,255.255.255.0,192.168.200.200
Interface2 is used for Multiple domains feature. (Not currently supported)
***{ MainB CPU }
In Redundant System, the second WV-ASC970 Server should use following IP addresses (remove the
asterisks below). In this case, {MainA CPU}'s interface numbers should be commented with asterisks.
*Interface0=172.16.192.2,255.255.0.0,172.16.192.2
*Interface1=172.18.0.2,255.255.0.0,172.18.0.2
*Interface2=192.168.200.201,255,255,255,0,192.168.200.201
}
}
}
}
67
Advertisement
Table of Contents
