Master Settings Programming - Pentair FLECK 5810 XTRI Service Manual

Connected xtr2

Hide thumbs

Table of Contents

• Master Settings: Displays the Master Settings screen,

which allows you to fully program the valve.

• Brightness/Sound: Displays the Brightness/Sound

screen, which allows you to adjust the backlight of the

control screen and allows you to mute the alarms of the

control.

NOTE: Due to the complexity of these settings and the

potential for errors, Master Settings should only be

accessed by your local water professional.

NOTE: Settings can not be accessed during a regeneration.

If a regeneration starts while in the settings menu,

the screen will return to the main screen and all

parameters will be voided.

Master Settings

The Master Settings screens include all configurable

parameters available in the control.

Improperly adjusting master settings may cause

CAUTION

the system to operate incorrectly. Before entering

master settings please contact your professional

water dealer.

From the Settings screen, press the Settings button

A warning message appears.

Figure 11 Master Settings Warning Screen

Press

to continue to the Password screen or press

return to the Home screen.

The Password screen displays a numeric keypad.

Figure 12 Password Screen

• Enter the master settings password 1201 and press

continue to the main Master Settings screen, or press

to return to the Home screen.

All manuals and user guides at all-guides.com

After entering the correct password and pressing

Master Settings screen is displayed.

Figure 13 Main Master Settings Screen

While in the Master Settings screens, press

set parameters to a custom profile (see "NON-FACTORY

SETTINGS" on page 13 or press the Home button

to the Home screen.

Features of the Master Settings screens are described

below. See MASTER SETTINGS PROGRAMMING and MASTER

SETTINGS REFERENCE CHART for more detailed information.

• format: Contains settings for Language, Units, Hardness

Units, Assistance Name, Assistance Phone, and

Assistance Interval.

• valve: Contains settings for System, Valve, and

Regeneration Type.

• regen: Contains settings for Regen Flow.

• relay: Contains settings for Aux 1 and Aux 2 relays.

• meter: (except for time clock systems) Contains settings

for Meter Types, emergency regeneration.

• settings review: Displays a summary of all programmed

settings.