Setting The Characteristic Map Of The Throttle Response - KTM 250 SX-F 2018 Owner's Manual

16 TUNING THE ENGINE
16.3

Setting the characteristic map of the throttle response

Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide plate.
A guide plate with a different characteristic map is supplied.
–
Check the throttle grip for smooth operation.
(XC‑F US)
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
Loosen nut
–
Turn adjusting screw
–
Loosen nut
–
Push cold start button
–
Turn adjusting screw
tion when the throttle grip is turned to the front.
–
Tighten nut
–
Turn adjusting screw
tle grip.
Guideline
Throttle cable play
–
Tighten nut
–
Slide on sleeve
F00163-10 –
Check the throttle grip for smooth operation.
Finishing work
–
Check the play in the throttle cable. (
Main work
–
Push back sleeve
–
Remove screws
–
Detach the throttle cables and take off the grip tube.
F00130-10
–
Remove guide plate
–
Position the required guide plate on the grip tube.
Guideline
The label OUTSIDE must be visible. Marking
B
ing .
Alternative 1
Grey guide plate (79002014000)
Alternative 2
Black guide plate (79002014100)
Info
The gray guide plate opens the throttle valve more slowly.
The black guide plate opens the throttle valve more quickly.
The black guide plate is already mounted when the vehicle is delivered.
102246-10
1
.
2 .
3
in as far as possible.
4
.
6
all the way to the stop.
5 so that the cold start button moves to the basic posi-
4 .
3
so that there is play in the throttle cable at the throt-
2
.
1 .
p. 84)
1
.
2 3
and half-shells .
4 5
from handle tube
3... 5 mm (0.12... 0.2 in)
.
A
must be positioned at mark-
85