Configuring The Printer - Miele PLW 8616 Operating Instructions Manual

System settings
Configuring the
printer
62
A connected printer can be set up using the display or the web inter-
face. To set the printer up in the web interface, see the programming
handbook.
Printer
Press the button.

Press the button next to the

The display shows a menu with the available printer options.
Please note:
Activate the required printer with the button next to the model des-

ignation.
The bar in the button of the activated printer is displayed in white.
Exit the menu with the  button.

You must enter the corresponding IP address of the selected network
printer.
Press the button next to the

The on-screen keyboard is displayed for entering the IP address.
Enter the IP address and press OK to confirm.

The Direct print-out
port is to be transferred to the connected printer and printed out im-
mediately at the end of the programme. In addition to being printed
out directly, the reprocessing report is also saved in the machine con-
trols. You can print out additional copies of a reprocessing report us-
Documentation
ing the
Press the button next to the

the option to print out directly.
The bar in the button is displayed in white.
Type
parameter.
IP address
parameter determines whether a reprocessing re-
Main menu
button in the
Direct print-out
parameter.
.
parameter to activate