System settings
Changing the PIN
58
A user can change their PIN at any time.
The minimum length of the PIN depends on the user level:
Operator
-
4 digits
Technician
-
8 digits
Administrator
-
10 digits
The PIN must contain numbers as well as uppercase and lowercase
letters. A–Z, a–z, 0–9, hyphens "-" and underscores "_" can be used.
It is not permitted to use:
- The same character more than three times in succession, e.g.
11112345
- Numbers at the end of a password, e.g. User_123
- One of the last ten passwords again
Change PIN
Press the
Entry prompts are given to change the PIN. The buttons next to the
parameters open the on-screen keyboard.
Enter the old PIN and then the new PIN twice and press OK to con-
firm.
The new PIN is applied in the User management in the web interface.
It is not visible there. If a user has forgotten their PIN, they can reset it
in the User management.
Administrator
The PIN for the
Customer Service Department.
button.
user level can only be reset by the