d.
WLAN card
e.
base cover
4. Follow the procedure in
DC-in
Removing the DC-in
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
WLAN card
c.
display assembly
3. To remove the DC-in:
a. Remove the 3 M2.5 x 6 screws that secure the right display hinge bracket to the system [1].
b. Lift the hinge bracket [2].
c. Disconnect the power-adapter port cable from the connector in the system board [3].
d. Disconnect the DC-in from the system [4].
Installing the DC-in
1. Place and connect the DC-in to its slot in the system.
2. Connect the power-adapter port cable to the connector in the system board.
38
Removing and installing components
After working inside your
Before working inside your
computer.
computer.