Wi-Fi; Client Management - D-Link DIR-615+ User Manual

Section 4 - Configuration
The Client Management page displays a list of currently connected Wi-Fi
devices. You can view detailed information about these devices or force them
to disconnect from your network.
List of Wi-Fi Clients
Refresh: Click here to refresh the connected clients list.
Disconnect:
Click here to disconnect the selected client(s) from your network.
Note that this only disconnects the client, it does not prevent the
client from reconnecting.
Hostname:
Indicates the hostname of the connected client.
MAC address:
Indicates the MAC address of the connected client.
Band:
Indicates the band over which the client is connected.
Network name
Indicates the SSID to which the client is connected.
(SSID):
Signal Level: Indicates signal strength as a percentage.
Online: Indicates the time online in minutes.
Last TX rate: Indicates the last recorded transmission rate in Mbps.
Rx/Tx: Indicates total bytes received or transmitted this session.
Power Saving Indicates the power saving status of the client.
Mode:
D-Link DIR-615+ User Manual

Wi-Fi

Client management

76