Table of Contents
Advertisement
Deactivation
To turn off the Rain Sensing Wipers, use the wiper
switch or place the ignition in the OFF position.
In the event of malfunction of the rain sensor while it is
active, the windshield wiper operates intermittently at a
speed consistent with the sensitivity setting of the rain
sensor, whether or not there is rain on the glass for as
long as the sensor failure is indicated on the display.
The sensor continues to operate and it is possible to
set the windshield wiper to continuous mode (low or
high). The failure indication remains on for as long as
the sensor is active.
The rain sensor is able to recognize and automatically
adjust itself when the following conditions occur:
•
Presence of dirt on the controlled surface (e.g., salt,
dirt, etc.).
•
Presence of streaks of water caused by the worn
window wiper blades.
•
Difference between day and night.
REAR WINDOW WIPER/WASHER
Shifting the vehicle into REVERSE with the windshield
wiper operating activates a single cycle of the rear win-
dow wiper.
Push the windshield wiper lever downward (with the
vehicle in REVERSE) to activate/deactivate continuous
rear wiper operation.
Push the windshield wiper lever downward (without the
vehicle in REVERSE) to activate/deactivate intermittent
rear wiper operation.
Push the windshield wiper lever towards the instrument
panel to activate the rear window washer (a brief push
activates one washing cycle, while keeping the stalk
pushed washes continuously until the stalk is
released).
NOTE:
Make sure the rear wiper is turned off when cleaning
the windshield glass.
CLIMATE CONTROLS
The Climate Control system allows you to regulate the
temperature, air flow, and direction of air circulating
throughout the vehicle. The controls are located on the
touchscreen and on the instrument panel below the
radio.
AUTOMATIC CLIMATE CONTROL
DESCRIPTIONS AND FUNCTIONS
Uconnect 5 NAV With 10.25-Inch Display Automatic
Climate Controls
GETTING TO KNOW YOUR VEHICLE
Instrument Panel Center Stack Climate Controls
MAX A/C Button
Press and release the MAX A/C button on
the touchscreen to change the current set-
ting to the coldest output of air. The MAX A/C
indicator illuminates when MAX A/C is on.
Pressing the button again will cause the MAX A/C
operation to exit. Pressing other settings will cause the
MAX A/C to exit.
NOTE:
The MAX A/C button is only available on the
touchscreen.
A/C Button
Press and release the A/C button on the
touchscreen, or push the button on the face-
plate to change the current setting. The A/C
indicator illuminates when A/C is ON.
The Air Conditioning (A/C) button allows the operator to
manually activate or deactivate the air conditioning system.
When the air conditioning system is turned on, dehumidi-
fied air will flow through the outlets into the cabin.
61
2
Advertisement
Table of Contents
