Table of Contents
Advertisement
The memory setting switch is located on the driver's
door trim panel. The switch consists of three buttons:
•
The (1) and (3) buttons which are used to recall
either of two saved memory profiles.
•
The set (2) button, which is used to activate the
memory save function.
PROGRAMMING THE MEMORY
FEATURE
To create a new memory profile, perform the following:
NOTE:
Saving a new memory profile will erase an existing pro-
file from memory.
1. Place the vehicle's ignition in the ON position.
2. Adjust all memory profile settings to desired prefer-
ences (i.e., seat and radio station presets).
3. Push and release the (2) button on the memory
switch, and then push the desired memory profile
button (1 or 3) within five seconds. A beep will
sound to confirm the memory profile has been suc-
cessfully stored.
MEMORY POSITION RECALL
To recall the memory settings for driver one or two,
push the desired memory button number (1 or 3).
NOTE:
•
Recalling a memory setting profile can also be done
about 20 minutes after the doors are opened and
about 20 minutes after the engine is stopped.
•
The movement of the seat is suspended if the
engine is started following the recall.
SEATS
Seats are a part of the Occupant Restraint system of
the vehicle.
WARNING!
•
It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured
or killed.
•
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts. In a collision, people riding in these areas
are more likely to be seriously injured or killed.
•
Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
MANUAL ADJUSTMENT REAR
SEATS
WARNING!
Do not pile luggage or cargo higher than the top of
the seatback. This could impair visibility or become a
dangerous projectile in a sudden stop or collision.
GETTING TO KNOW YOUR VEHICLE
60/40 Split Folding Rear Seat With
Fold-Flat Feature
To provide additional storage area, each rear seat can
be folded flat. This allows for extended cargo space and
still maintains some rear seating room.
NOTE:
Prior to folding the rear seat, it may be necessary to
position the front seat to its mid-track position. Also, be
sure that the front seats are fully upright and positioned
forward. This will allow the rear seat to fold down easily.
WARNING!
•
It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seriously
injured or killed.
•
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.
•
Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
45
2
Advertisement
Table of Contents
