MOTIF A.N.C. – FULL ONLINE MANUAL
INSTRUCTIONS
GETTING STARTED
I.
Open the charging case.
II. Press and hold the button on the case until the LED turns to a
slow blue pulse.
III. Select MOTIF A.N.C. from your sound device's Bluetooth® list.
IV. Download the Marshall Bluetooth app and follow the in-app instructions
to complete the setup.
CHARGING THE EARBUDS
Put your earbuds back in the case and close the lid to turn them off
and begin charging.
CHARGING THE CASE
Use a wireless charger or plug the case into a USB power source to charge it.
The case is fully charged when the front-facing LED is steady green.
To charge the case using a wireless charger, follow the instructions below.
I.
Place the charging case with its back flat against the wireless charging pad.
II. Make sure that the front LED lights up to indicate that the case is charging.
III. Once the LED light has turned steady green the case is fully charged.
NOISE CONTROL
Long touch either earbud to cycle through the noise control modes.
•
Noise cancelling mode - blocks out your surroundings and lets you focus
on the music
•
Transparency mode - allows you to hear your surroundings and hold
conversations without removing your earbuds
•
Off – noise control is turned off
The amount of noise cancelling and transparency can be adjusted in the
Marshall Bluetooth app.
BACK TO INDEX
005
005
ENGLISH